Z Series E85 Z4 3.0Si (N52) ROADST
64 11 213
Removing and installing/replacing heater -
A/C fan
Necessary preliminary tasks:
•
Remove right glovebox with housing.
•
Remove right footwell channel.
•
If necessary, remove servodrive for footwell flap.
Important!
Disconnect battery negative lead.
Loosen screws (1).
Detach current distributor (2) in direction of arrow and lay to one
side.
Installation:
Make sure guide (3) is correctly seated in mounting (4).
Release screws (1), (2) and (3).
Remove carrier for current distributor (4).
RA Removing and installing/replacing heater - A/C fan
BMW AG - TIS
17.02.2013 16:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
