Z Series E85 Z4 3.0Si (N52) ROADST
Installation:
Make sure rubber grommet (1) is correctly seated on all-round
flange of side section (2).
If necessary, replace rubber grommet.
Antenna base is secured by chamfer (3) against incorrect
installation.
Installation:
Pay attention to installation position of rubber grommet (1).
•
A: Sealing lip, top
•
B: Mounting for rabbet of side section
RA Removing and installing/replacing antenna base
BMW AG - TIS
17.02.2013 17:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
