Z Series E85 Z4 3.0Si (N52) ROADST
65 50 055
Removing and installing/replacing central
information display
Special tools required:
•
00 9 323
Necessary preliminary tasks:
•
Remove center fresh air grill
•
Remove cover
Unlock plug connections (1) and (2) and disconnect.
Unlock plug (4) and detach in direction of arrow from plug (3).
Turn plug (3) counterclockwise and unclip from mounting
underneath.
Lever out cover (1) with special tool 00 9 323 and remove.
Loosen screws (2).
Raise Central Information Display (3) on right, feed out in
direction of arrow and remove.
Installation:
Ensure correct cable routing for Central Information Display (3).
RA Removing and installing/replacing central information display
BMW AG - TIS
17.02.2013 17:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -