bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 SBT Dynamic Stability Control Mk60E5 E85, E86, E87, E90, E91, E92, E93|Page 3546 > < 2 SBT Dynamic Stability Control Mk60E5 E85, E86, E87, E90, E91, E92, E93|Page 3544
Page 3
background image

4 active wheel-speed sensors

> E87 with 6-cylinder engine, E90, E91, E92, E93

The active wheel-speed sensors measure the speed of the individual wheels. This type of sensor also
recognises the direction of rotation of the wheels.

[more ...]

DSC sensor

The DSC sensor measures the rotation of the vehicle around the vertical axis (yaw rate) and the lateral
acceleration of the vehicle.

> E85, E86

The longitudinal-acceleration sensor is part of the DSC sensor.

On vehicles with Active Steering, a DSC sensor is installed with redundant sensor system (i.e.. 2 signals for
yaw rate and 2 signals for lateral acceleration).

[more ...]

DSC unit

The DSC unit consists of the hydraulic unit and the DSC control unit.

All 5 brake pressure sensors are integrated into the valve block of the DSC unit.

The board of the DSC control unit also holds a longitudinal-acceleration sensor.

> E85, E86

The longitudinal-acceleration sensor is not part of the DSC unit but rather part of the DSC sensor.

[more ...]

Steering-angle sensor

> E85, E86

The steering-angle sensor uses sliding contacts to measure the angle of rotation of the steering wheel. 

[more ...]

>E87, E90, E91, E92, E93

The steering-angle sensor optically measures the angle of rotation of the steering wheel.

[more ...]

DTC button

> E85, E86

The DTC button is located in the SZM (centre console switch cluster).

>E87, E90, E91, E92, E93

The DTC button is located in the centre console between the central air vents.

The DTC button has 3 switching states:

1. 

DSC operational (standard setting)

2. 

DTC operational

3. 

DSC and DTC completely deactivated

Additional input signals from the following components:

Brake-fluid-level switch 

If the brake fluid level is too low, this will be detected (via a reed contact in the expansion tank) and an
appropriate message sent to the DSC control unit.

DSC is deactivated if there is insufficient brake fluid. There would otherwise be a risk of air being drawn into the
brake system.

SBT  Dynamic Stability Control Mk60E5 E85, E86, E87, E90, E91, E92, E93

BMW AG - TIS

18.02.2013  04:21

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 3 -

2 SBT Dynamic Stability Control Mk60E5 E85, E86, E87, E90, E91, E92, E93|Page 3546 > < 2 SBT Dynamic Stability Control Mk60E5 E85, E86, E87, E90, E91, E92, E93|Page 3544