Z Series E86 M coupe (S54) COUPE
Note:
Sprocket wheel is secured with an adapter sleeve (1) to
crankshaft.
Installation:
Check adapter sleeve (1) for damage and correct installation
position.
Installation:
Align adapter sleeve of sprocket wheel to locating bore of
crankshaft and fit sprocket wheel.
Apply a thin coat of screw retaining compound to screw thread (1).
Insert screw.
Tighten down crankshaft sprocket wheel to 10 Nm.
Caution!
Observe grinding stage of crankshaft.
Replace main crankshaft bearing shells.
Replace conrod bearing shells.
Replace grooved ball bearings in crankshaft.
RA Replacing crankshaft (S54)
BMW AG - TIS
06.02.2013 21:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
