Z Series E86 M coupe (S54) COUPE
Rotate crankshaft in direction of rotation up to cylinder 1 firing
TDC position.
Important!
Do not crank engine in reverse direction.
Rotate crankshaft in direction of rotation up to cylinder 1 firing
TDC position. Locate vibration damper with special tool
11 2 300 or 11 0 480 .
Check camshaft setting:
Attach special tool 11 9 140 and join in locating bore of inlet
camshaft.
Note:
The adjustment of the inlet camshaft is correct when special tool
11 9 140 rests flat on the cylinder head.
If the special tool 11 9 140 protrudes to the inlet side, the
timing must be readjusted.
Join special tool 11 9 140 in locating bore of exhaust camshaft.
Note:
The adjustment of the exhaust camshaft is correct when special
tool 11 9 140 rests flat on the cylinder head.
If the special tool 11 9 140 protrudes to the inlet side, the
timing must be readjusted.
If necessary, adjust camshaft timing.
RA Checking camshaft timing (S54)
BMW AG - TIS
06.02.2013 21:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
