Z Series E86 M coupe (S54) COUPE
Disconnect compressed air from special tool 11 7 130 .
Remove special tool 11 7 130 .
•
Unscrew screws (1).
•
Remove sliding rail (2).
•
Unscrew screws (3).
•
Remove holder (4).
Remove special tool 11 2 300 . Rotate crankshaft in direction
of rotation a further revolution up to overlap TDC position.
Note:
TDC allocation above marking on vibration damper is sufficient.
Slacken six accessible bolts two turns.
RA Replacing camshafts (S54)
BMW AG - TIS
06.02.2013 21:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
