bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

10 RA Replacing Throttle Valve Potentiometer (on Throttle Valve Actuator S54) > < 8 RA Removing And Installing_replacing Throttle Actuator (S54)|Page 454
Page 1
background image

12 90 100

Replacing fan for electronics box (N52)

Unfasten screws.

Open electronics box cover (1).

Release relay plug on reverse side of cover.

Remove cover.

Installation:

Make sure that cover is correctly inserted in hinges of electronics
box lower section (watertightness).

Raise control unit slightly.

Unlock plug connection (1) and detach from equipment carrier.

Unfasten plug connection and disconnect.

Lever out expander rivet.

Release screws (1).

Remove cover (2).

Unfasten screws.

Remove fan (1).

RA  Replacing fan for electronics box (N52)

BMW AG - TIS

06.02.2013  21:42

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

10 RA Replacing Throttle Valve Potentiometer (on Throttle Valve Actuator S54) > < 8 RA Removing And Installing_replacing Throttle Actuator (S54)|Page 454