Z Series E86 M coupe (S54) COUPE
13 54 045
Removing and installing/sealing a throttle
valve assembly (S54)
Note:
Interrogate fault memory of DME control unit.
Turn off ignition.
Remove intake air manifold.
Remove fan cowl.
Release nuts, remove idle-speed control valve (1) together with
holder from assembly and place to one side.
If throttle valve assembly 1 is to be removed, remove throttle
valve potentiometer.
If throttle valve assembly 6 is to be removed, remove pulse
generator of inlet camshaft.
Remove fuel injector rail. This operation is described in the
section "Removing and installing/replacing a fuel injector".
Remove auxiliary air line.
RA Removing and installing/sealing a throttle valve assembly (S54)
BMW AG - TIS
06.02.2013 22:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -