Z Series E86 M coupe (S54) COUPE
25 11 ...
Replacing shift arm (reinforced) for shift lever
mounting
Necessary preliminary tasks:
•
Remove cross-member
•
Unflange propeller shaft from transmission and tie up to
vehicle underbody on one side
•
Remove selector lever
•
Remove support bearing from fixture
Detach retainers (1) towards rear top.
Pull out fastener (1) with bearing pin at side.
Installation:
Grease bearing pin.
Remove shift arm (1) towards top.
RA Replacing shift arm (reinforced) for shift lever mounting
BMW AG - TIS
06.02.2013 22:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -