Z Series E86 M coupe (S54) COUPE
Important!
Check installation location.
Arrow (1) on rubber mount must point to marking (2) on
bracket.
Keep bracket and rubber mount clean and free from oil and
grease.
Important!
Check installation location.
Marking (1) must point upwards.
Press in rubber mount with special tools 33 3 313 and
31 2 261 . Protrusion (A) must be the same on both sides.
Apply a centre mark to bracket in area (1).
RA Replacing rubber mounts on both control arms (M Roadster, M Coupé)
BMW AG - TIS
06.02.2013 23:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
