Z Series E86 M coupe (S54) COUPE
32 32 050
Removing and installing/replacing lock
cylinder for steering lock
Special tools required:
•
32 3 110
Necessary preliminary tasks:
•
Remove ring aerial
Insert ignition key into lock cylinder in such a way that release
opening (arrow) remains accessible.
Turn ignition key to position "1" = switch on ignition.
Press special tool 32 3 110 into lock cylinder hole and pull out
lock cylinder.
Installation:
Align lock cylinder by way of opening to steering column and
insert.
Withdraw special tool 32 3 110 .
Turn ignition key to "zero" position and remove.
RA Removing and installing/replacing lock cylinder for steering lock
BMW AG - TIS
06.02.2013 23:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -