Z Series E86 M coupe (S54) COUPE
Expose pressure line up to connection on power steering gear.
Release banjo bolt and disconnect pressure line.
Installation:
Replace sealing rings.
Make sure hydraulic line is laid without tension and with sufficient
spacing to adjoining components.
Tightening torque 32 41 3AZ
.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Replacing pressure line for power steering (S54)
BMW AG - TIS
07.02.2013 00:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
