Z Series E86 M coupe (S54) COUPE
32 41 351
Replacing return line for power steering (S54)
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Seal off hydraulic lines with plugs.
Recycling:
Catch and dispose of hydraulic fluid in a suitable container.
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
•
Remove front underbody protection
Release quick-connect coupling and seal cooling coil connection
with a suitable plug.
Installation:
Make sure hydraulic line is laid without tension and with sufficient
spacing to adjoining components.
RA Replacing return line for power steering (S54)
BMW AG - TIS
07.02.2013 00:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
