Z Series E86 M coupe (S54) COUPE
Remove front underbody protection.
Release screw (1).
Tightening torque 32 41 9AZ
.
If necessary, remove hose clamps (2) with special tool
32 1 260 .
Note:
If necessary, raise and/or turn fluid reservoir in order to gain better
access to hose clamps.
Disconnect suction line (3) and radiator return line (4) from fluid
reservoir.
Lift out fluid reservoir.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Removing and installing/replacing fluid reservoir for power steering (S54)
BMW AG - TIS
07.02.2013 00:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
