bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Replacing Left Or Right Drive Flange On Rear Differential (M Roadster, M Coupé)|Page 1019 > < 3 RA Replacing Shaft Seal For Input Flange On Final Drive|Page 1017
Page 1
background image

33 11 091

Replacing left or right drive flange on rear
differential (M Roadster, M Coupé)

Important!

When replacing the drive flange, you must also replace the 
shaft seal!

Necessary preliminary tasks:

Remove exhaust system.

Remove stabilizer link bracket on both sides from

upper control arm

Remove output shaft from rear differential and tie back

Press out drive flange (1) with two suitable tools.

Installation:

Insert drive flange and rotate until spline on flange meshes with
teeth on differential bevel gear.

Press drive flange in further until circlip locates with an audible
click.

Important!

High installation forces indicate that the spline teeth on the
drive flange/differential bevel gear are damaged/deformed!

Check spline teeth, replaced damaged parts.

RA  Replacing left or right drive flange on rear differential (M Roadster, M Coupé)

BMW AG - TIS

07.02.2013  00:17

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Replacing Left Or Right Drive Flange On Rear Differential (M Roadster, M Coupé)|Page 1019 > < 3 RA Replacing Shaft Seal For Input Flange On Final Drive|Page 1017