Z Series E86 M coupe (S54) COUPE
34 33 505
Removing and installing/replacing brake
booster
Necessary preliminary tasks:
•
General Information
•
Remove brake master cylinder for DSC
•
Remove brake pedal
•
Remove vacuum hose for brake booster
•
Remove sound generator (applicable to Z4 3.0 only)
After completing tasks, bleed brake system with DSC.
Release nuts (1).
Installation:
Replace self-locking nuts.
Tightening torque 34 33 12AZ
.
Note:
Do not use any force when removing and installing the brake
unit; the brake unit can be damaged under certain
circumstances.
Carefully remove brake unit (1) from bulkhead and tilt out in
direction of engine.
RA Removing and installing/replacing brake booster
BMW AG - TIS
07.02.2013 00:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
