Z Series E86 M coupe (S54) COUPE
Release 4 screws (1) on underside of roof.
Tightening torque 41 31 1AZ
.
Installation:
Observe gap dimensions.
Note:
Use cutting wire from Roll Out 2000.
Pierce adhesive bead in area (1) and feed through wire.
Cut through adhesive bead and remove roof.
Installation:
Stick on spacers (1).
Installation:
Clean adhesive flanges.
Do not apply any adhesive agents to either side prior to bonding.
Apply adhesive bead (1) to roof.
Bead in area (2).
Measurement a=12
±
1
Measurement b=7
±
1
Measurement h=11-2
RA Replacing roof outer skin
BMW AG - TIS
07.02.2013 01:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
