Z Series E86 M coupe (S54) COUPE
65 75 551
Removing and installing/replacing tilt sensor
Necessary preliminary tasks:
Cars without CD changer and navigation system only:
•
Remove rear storage box
Cars with CD changer and/or navigation system only:
•
Remove panel for rear storage box
•
Remove right rear speaker trim
Cars with CD changer and/or navigation system only:
Release screws (1) and pull back panel (2) in lower section a
little.
All models:
Unscrew nuts (1).
Feed out tilt alarm sensor (3) with holder.
Disconnect plug connection (2).
If necessary, detach holder from tilt alarm sensor.
RA Removing and installing/replacing tilt sensor
BMW AG - TIS
07.02.2013 09:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
