Z Series E86 Z4 3.0Si (N52) COUPE
12 42 530
Removing and installing/replacing battery
positive lead (between starter motor and
alternator) (N52)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Disconnect battery negative lead
Observe instructions for disconnecting and connecting
battery
•
Remove intake air manifold
Release nut and remove battery positive lead (1) from alternator.
Tightening torque 12 31 1AZ
.
Unlock plug (1) and remove.
Unfasten nut.
Tightening torque 12 41 3AZ
.
Detach battery positive lead (2) from starter motor and remove.
RA Removing and installing/replacing battery positive lead (between starter motor a
BMW AG - TIS
08.02.2013 08:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
