Z Series E86 Z4 3.0Si (N52) COUPE
Raise control unit (1) with equipment carrier slightly.
Unlock plug (2) by means of slide in direction of arrow and
remove from control unit.
Press locking tab (1) in direction of arrow and pull contact
carrier (2) out of housing.
Press both locking tabs (1) in direction of arrow and pull contact
carrier (2) out of housing.
Press locking tab (1) in direction of arrow and pull contact
carrier (2) out of housing.
RA Replacing wiring harness section for ignition coil (N52)
BMW AG - TIS
08.02.2013 08:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -