Z Series E86 Z4 3.0Si (N52) COUPE
16 14 500
Removing and installing/replacing control
unit for electric fuel pump (N52)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
-
E85:
•
Remove front trim for luggage compartment floor
•
Partially detach trim panel in luggage compartment at
front right
-
E86:
•
Remove trim panel for luggage compartment on right
Replacement:
-
Carry out programming/coding
Disconnect plug connection (1).
Loosen nut (2).
Release nut (3) and remove control unit.
Installation:
Tightening torque 16 14 4AZ
.
RA Removing and installing/replacing control unit for electric fuel pump (N52)
BMW AG - TIS
08.02.2013 08:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -