Z Series E86 Z4 3.0Si (N52) COUPE
23 00 019
Removing and installing transmission (GS6-
37BZ) N52
Special tools required:
•
00 1 450
•
00 2 030
•
00 9 120
•
00 9 130
•
21 2 221
•
23 0 132
•
23 0 170
•
23 4 050
•
24 0 200
Important!
After completion of work, check transmission oil level.
Use only the approved gear oil in this manual transmission;
failure to comply with this requirement will result in serious
damage.
Important!
Aluminium-magnesium materials.
No steel screws/bolts may be used due to the threat of
electrochemical corrosion.
A magnesium crankcase requires aluminium screws/bolts
exclusively.
Aluminium screws/bolts must be replaced each time they are
released.
The end faces of these screws/bolts are painted blue for the
purposes of reliable identification.
Jointing torque and angle of rotation must be observed
without fail (risk of damage).
RA Removing and installing transmission (GS6-37BZ) N52
BMW AG - TIS
08.02.2013 09:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
