Z Series E86 Z4 3.0Si (N52) COUPE
Important!
Never re-use a rubber mount pulled off control arm. Rubber-
coated inner sleeve is destroyed when pulled off dry.
Detach bracket with special tools 00 7 500 and 31 2 151 from
control arm.
Important!
If the position of the rubber mount is not strictly adhered to,
this will result in impaired vehicle handling and early rubber
mount wear!
Mark dimension (A) = 287.3
±
1 mm on control arm pin.
Note:
Outer edge (B) of rubber mount must be flush with marked
measurement (A).
RA Replacing both control arm brackets
BMW AG - TIS
08.02.2013 10:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
