Z Series E86 Z4 3.0Si (N52) COUPE
Mark severance cuts to prespecified measurements a and b and cut.
Important!
At severance cut (1), cut only side frame connecting plate.
At severance cut (2), cut outer A-pillar and outer entrance.
Measurement a = approx. 120 mm.
Measurement b = approx. 215 mm above lower edge of A-pillar.
Open weld joints in area (3) and cut out components.
Installation:
Weld in reinforcing panel at severance cut (1).
No reinforcing panel is welded in at severance cut (2).
Measurement K = 307 mm serves as the reference dimension.
Also weld weld joints in areas (4).
RA Replacing cover for left or right frame side member (side panel removed at front
BMW AG - TIS
08.02.2013 12:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -