Z Series E86 Z4 3.0Si (N52) COUPE
51 11 156
Removing and installing front bumper trim
Special tools required:
•
00 9 317
Release screws in area (1) and remove strip (2).
Release expansion rivets (1) on left/right.
Release screws (1).
Build date from 01/2006:
Unfasten screws (2).
Installation:
Bumper trim is secured through opening (3) on left/right.
RA Removing and installing front bumper trim
BMW AG - TIS
08.02.2013 13:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -