bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing_replacing Centre Cover On Instrument Panel > < 1 RA Cementing Of Mirror Base
Page 2
background image

seated straight.

(Long side of mirror base hexagon parallel to upper edge of window).

3.4 Hardening of cement

Hardening speed depends on the ambient temperature.

For this reason, the mirror base must be secured with adhesive tape or similar for at least 3 ... 4 hours.

After 12 hours have elapsed, clip mirror into place as sooon as possible.

4.

Working Hygiene

Caution!

Cement is dangerous for health when vapours are inhaled or through contact with the skin.

As is the case for all epoxide resins, sensitive persons might be confronted with an alergy through contact with the

skin.

If the product gets on the skin, wash off with soap and water immediately.

If it gets in an eye, rinse the eye thoroughly in water and consult doctor.

Make sure that the room is well ventilated and gloves are worn for the application of cement.

RA  Cementing of mirror base

BMW AG - TIS

08.02.2013  13:42

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

2 RA Removing And Installing_replacing Centre Cover On Instrument Panel > < 1 RA Cementing Of Mirror Base