Z Series E86 Z4 3.0Si (N52) COUPE
51 16 366
Removing and installing right glovebox with
housing (without active knee protection)
Open glovebox.
Press catches (1) and unclip damper (2) in direction of arrow
from glovebox (3).
Press locks (1) and continue folding glovebox (2) downwards.
Release screws (1) and remove glovebox with housing (2).
If necessary, release plug-in contacts and cable holders from
housing (2).
RA Removing and installing right glovebox with housing (without active knee protect
BMW AG - TIS
08.02.2013 13:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -