Z Series E86 Z4 3.0Si (N52) COUPE
51 16 367
Removing and installing right glovebox with
housing (with active knee protection)
Special tools required:
•
00 9 317
Warning!
Read and comply with safety regulations for handling airbag
modules and pyrotechnical belt tensioners.
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
•
Disconnect negative battery cable
•
Remove right glovebox
Release screws (1 and 2).
Installation:
Replace screws (2).
Tightening torque 72 12 19AZ
.
Note:
Secure right glovebox with housing (4) against falling out.
Lever out right glovebox with housing (4) using special tool
00 9 317 at retaining points (3) and remove.
RA Removing and installing right glovebox with housing (with active knee protection
BMW AG - TIS
08.02.2013 13:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -