Z Series E86 Z4 3.0Si (N52) COUPE
51 16 383
Removing and installing/replacing damper for
glovebox
Necessary preliminary tasks:
•
Remove glovebox with housing
Version without active knee protection:
Press catch (1) together and slide damper (2) in direction of
arrow.
Remove damper (2) in inward direction.
Release clip (1) and remove holder (2).
Installation:
Catch (5) and guide (4) on damper (3) must not be damaged or
missing.
Version with active knee protection:
Release screws (1) and damper (2).
RA Removing and installing/replacing damper for glovebox
BMW AG - TIS
08.02.2013 13:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
