Z Series E86 Z4 3.0Si (N52) COUPE
51 16 000
Removing and installing/replacing mirror on
left or right front door
Necessary preliminary tasks:
•
Remove door trim panel
•
Remove trim from triangular mirror section
Lever out clip (1) and expose cable (2).
Installation:
If necessary, replace faulty clip (1).
Press rubber grommet (1) outwards.
Release screws (2) and feed out rearview mirror (3) with cable.
Tightening torque 51 16 1AZ
.
Replacement only:
Due to the thread-tapping screws, the tightening torque of the new
mirror is increased by 2Nm.
Tightening torque 51 16 1AZ
.
Installation:
Following parts of rearview mirror (3) must not be damaged or
missing:
1
Cable grommet
2
Sound insulation
Check function.
RA Removing and installing/replacing mirror on left or right front door
BMW AG - TIS
08.02.2013 13:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
