bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

9 RA Removing And Installing_replacing Interior Rearview Mirror (with Japanese Toll M|Page 1417 > < 8 RA Removing And Installing_replacing Interior Rearview Mirror (overview)|Page 1415
Page 1
background image

51 16 060

Removing and installing/replacing interior
rearview mirror (with Japanese toll mirror)

Important!

Work may only be carried out at a room/object temperature of
18 ... 28 

°

C.

If this cannot be guaranteed (cold/hot countries), it is
necessary to equalize the temperature of the windscreen,
mirror foot and rearview mirror (e.g. car left to stand indoors or
in the shade for at least 30 minutes).

Version with remote control for central locking:

If necessary, disconnect negative lead from battery.

 

Version with compass:

Check compass function if replacing or after disconnecting interior
mirror plug connection or battery.

If necessary, calibrate compass in interior rearview mirror.

 

E60 Security version:

Rain sensor is not installed, cable connection is tied back in
roofliner.

Important!

To avoid breaking windscreen:

Screw rearview mirror off mirror mount.

Mirror must not be pulled or pressed off towards front or rear.

RA  Removing and installing/replacing interior rearview mirror (with Japanese toll m

BMW AG - TIS

08.02.2013  13:47

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

9 RA Removing And Installing_replacing Interior Rearview Mirror (with Japanese Toll M|Page 1417 > < 8 RA Removing And Installing_replacing Interior Rearview Mirror (overview)|Page 1415