Z Series E86 Z4 3.0Si (N52) COUPE
Press on end caps (1) and at same time pull them apart; this
releases clip connection of both caps (1).
Turn mirror (1) to right and left and feed out end caps (2).
Installation:
Catches (1) and guides (2) of end caps (3) must not be
damaged, replace if necessary.
Disconnect plugs (1 and 2).
Note:
Pay attention to cable guide for rain sensor.
E60 Security version:
Rain sensor is not installed, cable connection is tied back in
roofliner.
RA Removing and installing/replacing interior rearview mirror (with Japanese toll m
BMW AG - TIS
08.02.2013 13:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
