Z Series E86 Z4 3.0Si (N52) COUPE
51 45 185
Removing and installing/replacing panel for
pedals
Release screws (1).
Release expansion rivet (3).
Pull back panel for pedals (2) in direction of arrow.
Disconnect plug connection for footwell, disconnect gong and
remove panel for pedals (2).
Replacement:
Remove footwell light.
If necessary, remove gong.
Installation:
Make sure guides (4) of panel for pedals (2) are correctly seated
in associated mountings.
Make sure panel for pedals (2) is correctly seated on footwell
vent above.
RA Removing and installing/replacing panel for pedals
BMW AG - TIS
08.02.2013 14:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -