Z Series E86 Z4 3.0Si (N52) COUPE
61 35 622
Removing and installing/replacing general
module
Necessary preliminary tasks:
•
Remove trim for instrument panel, bottom left
Release screws (1).
Remove general module (3) from instrument panel trim at bottom
right (4).
Installation:
Make sure general module (3) is correctly seated in guides (2).
Replacement:
Carry out programming/coding.
RA Removing and installing/replacing general module
BMW AG - TIS
08.02.2013 17:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -