Z Series E86 Z4 3.0Si (N52) COUPE
61 35 910
Removing and installing/replacing control
unit of electronic immobilizer
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove trim panel for pedal assembly.
Unfasten plug connection (2) and disconnect.
Release nuts (1) and remove control unit of electronic
immobilizer (3).
Replacement:
Carry out coding/programming.
Observe following IDC specifications:
•
Programming
•
Coding
•
If necessary, car & key memory
•
CD "CIP"
RA Removing and installing/replacing control unit of electronic immobilizer
BMW AG - TIS
08.02.2013 17:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
