Z Series E86 Z4 3.0Si (N52) COUPE
Unlock plug connections (1), (2) and (3) and disconnect.
Feed out wiring harness (4) and lay to one side.
Installation:
Make sure wiring harness (4) is correctly routed.
Loosen screws (1).
Installation:
Tightening torque = 1.5
±
0.3 Nm (64 11 2AZ)
.
Take out fan for heater/air conditioner (2) in direction of arrow
and remove to bottom right.
Installation:
Make sure fan for heater/air conditioner (2) is correctly seated.
RA Removing and installing/replacing heater - A/C fan
BMW AG - TIS
08.02.2013 18:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
