Z Series E86 Z4 3.0Si (N52) COUPE
64 11 377
Removing and installing (replacing) control
panel for heater - A/C system
Special tools required:
•
00 9 317
Necessary preliminary tasks:
•
Remove radio receiver
Lever out cover (1) with special tool 00 9 317 and remove.
Installation:
Make sure cover (1) is correctly seated.
Unlock plug connections (1) and disconnect.
Unfasten screws (2).
RA Removing and installing (replacing) control panel for heater - A/C system
BMW AG - TIS
08.02.2013 18:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -