Z Series E86 Z4 3.0Si (N52) COUPE
64 53 ...
Replacing valve insert for refrigerant line
Warning!
Risk of injury!
Refrigerant circuit is under high pressure!
Follow safety instructions for handling R 134a refrigerant .
Follow safety instructions for handling refrigerant oil.
Avoid contact with refrigerant and refrigerant oil.
Important!
Risk of damage!
Restart engine only when A/C system has been correctly
filled.
Follow instructions for opening and replacing parts in
refrigerant circuit!
If A/C system is opened for more than 24 hours:Replace
desiccant insert for A/C system
Note:
The special tool is available under BMW order number:
81 34 0 427 679 from the BMW workshop equipment
catalogue.
Necessary preliminary tasks:
•
Drawing off, evacuating and filling the A/C system are not
included in the time value given for this work operation
RA Replacing valve insert for refrigerant line
BMW AG - TIS
08.02.2013 18:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
