Z Series E86 Z4 3.0Si (N52) COUPE
66 20 508
Removing and installing/replacing control
unit (Park Distance Control)
Necessary preliminary tasks:
•
Remove right luggage compartment wheel arch trim.
Unscrew nut (1).
Pull control unit (2) with control unit (3) in direction of arrow
slightly out of retainer (4).
Unlock plug connections (5) and disconnect.
Remove control unit holder (2) with control unit (3).
Replacement:
Carry out coding/programming.
Observe following IDC specifications:
•
Programming
•
Coding
•
If necessary, car & key memory
•
CD "CIP"
Replacement:
Unscrew nuts (1).
Remove control unit (2) from control unit holder (3).
RA Removing and installing/replacing control unit (Park Distance Control)
BMW AG - TIS
08.02.2013 19:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -