Z Series E86 Z4 3.0Si (N52) COUPE
84 11 519
Removing and installing/replacing eject box
Special tools required:
•
00 9 340
Necessary preliminary tasks:
•
Remove rear storage box
Lever eject box (1) with special tool 00 9 340 out of storage
box cover (2).
Disconnect plug connections (1) and if necessary release cable
ties.
Feed lead (2) out of floor lining (3) and remove eject box.
Installation:
Make sure lead is correctly routed.
Lead (2) must not be crushed.
RA Removing and installing/replacing eject box
BMW AG - TIS
08.02.2013 19:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
