Century L4-151 2.5L (1989)
Steering Column: Service Precautions
When servicing collapsible steering columns, care should be exercised since they are extremely susceptible to damage. Dropping of or leaning
on column or striking sharp blows on end of steering shaft or shift levers could loosen or shear plastic fasteners which maintain column rigidity.
It is important that only the specified screws, bolts and nuts be used during the mandatory reassembly sequence and torqued to specifications
to insure proper breakaway action of column under impact. Avoid using excessively long bolts as they may prevent a portion of the steering
column from collapsing under impact.
When removing or installing, steering wheel, ignition switch or lock, turn signal switch, adjusting transmission linkage, or installing and
adjusting neutral-start or back-up light switch, refer to appropriate car chapter.
If a shift tube shows a sheared plastic injection, a new shift tube must be installed. If a steering shaft shows a sheared plastic, but it is not
bent, it can be repaired by using a Service Steering Shaft Repair Kit part number 7810077. The kit contains instructions and dimensions for all
steering columns. On some models, the attaching brackets will shear under impact and must also be replaced.
