buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

A/T - Possible Reuse Hex Head Screws & Conical Washers|Page 2959 > < 9274T603|Page 2954
Page 1
background image

Seals and Gaskets: Technical Service Bulletins
A/T - Possible Reuse Hex Head Screws & Conical Washers

Bulletin:

85-7-4

Date:

Feb 1985

Ref. No.:  85-128-7
SUBJECT:

USAGE OF HEX HEAD SCREW AND CONICAL WASHER ASSEMBLIES

MODELS AFFECTED:

ALL THM TRANSMISSIONS OR TRANSAXLES

HEX HEAD SCREW AND CONICAL WASHER ASSEMBLY

When servicing any THM transmission or transaxle and removal of the side cover and/or bottom pan is required, IT IS NOT ALWAYS NECESSARY
TO REPLACE THE HEX HEAD SCREWS AND CONICAL WASHER ASSEMBLIES.

Only screws with the coating stripped away exposing exterior portion of the head or washer or those screws with the washer inverted should be replaced.
(See illustration below).

Insert this information in the appropriate section of your 1985 service manual..

A/T - Possible Reuse Hex Head Screws & Conical Washers|Page 2959 > < 9274T603|Page 2954