Century L4-2.2L VIN 4 (1994)
American Sure Seal Urethane Cleaner, P/N CUSH
Kent Acrysol, P/N 20005
2. After cleaning with above, wipe clean with 50/50 solution of isopropyl alcohol and water.
3. Surface should be 65°F (18°C) or higher.
4. For the front doors, remove protective backing from the foam seal and install the seal starting at the rear upper corner working forward as shown in
Figure 1.
5. For rear doors, cut to length and install.
6. After installation, press seal firmly to fully seat the seal to the door.
PART INFORMATION
Parts are currently available from GMSPO.
WARRANTY INFORMATION
For vehicles repaired under warranty, use:
Labor Operation
Labor Time
C1630
0.3 hr