buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Front Air Duct|Page 5324 > < Front Air Duct
Page 1
background image

Air Cleaner Fresh Air Duct/Hose: Service and Repair
Rear Air Duct Assembly

Air Intake System

Remove or Disconnect

1. Remove intake air temperature (IAT) sensor electrical connector
2. Loosen clamps at throttle body unit and air cleaner
3. Remove rear air duct assembly from vehicle

Install or Connect

1. Position rear air duct assembly onto throttle body unit and air cleaner. Position PCV nipple over fresh air vent on rocker cover and assure

properly seated position

2. Fasten clamps securely
3. Connect IAT sensor electrical connector

Front Air Duct|Page 5324 > < Front Air Duct