Century L4-2.2L VIN 4 (1994)
Front Door Window Electric Regulator Assembly
Tool Required:
M 30910 Heavy Duty Rivet Gun
Remove or Disconnect
1. Water deflector.
2. With window in full-up position, tape window to door frame.
3. Lower sash bolts.
4. Punch out center pins of rivets holding regulator to door inner panel.
5. Using 1/4 inch drill bit, drill out rivets.
6. Move regulator and motor assembly rearward and remove electrical connector.
7. With regulator in door, drill out regulator to motor rivets using a 3/16 inch drill bit. Remove motor.
Install or Connect
1. Motor.
2. Using M 30910 rivet motor to regulator using 3/16 inch rivets or 3/16 inch nuts and bolts.
3. Electrical connector.
4. Regulator and door inner panel using 1/4 inch rivets.
5. Lower sash bolts.
6. Water deflector.
7. Tape from window.
