Century V6-173 2.8L (1986)
Band Apply Servo: Service and Repair
Hydra-Matic 125C (3T40)
Refer to "No Second Gear" in the "Service Bulletins" section prior to performing the following procedure.
1.
Raise and support vehicle.
2.
Remove oil pan and gasket, then remove screen and O-ring.
3.
Remove reverse oil pipe retaining brackets, intermediate servo cover and gasket.
4.
Remove intermediate servo assembly.
5.
Reverse procedure to install. Refer to "Torque Specifications Chart" for torque values.
