buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Recall - Brake Proportioner Valve Breakage|Page 3461 > < Recall - Brake Proportioner Valve Breakage|Page 3459
Page 2
background image

Model

Usage

10 mm

13 mm

Century

*With JA2 (Hvy Duty

18009966(FJ)

18009967 (RJ)

Brake System

Century

**With JA1 (Lt. Duty

18008570(FK)

18008571 (RK)

Brake System)

Skylark

ALL

18008570(FK)

18008571 (RK)

Skyhawk

ALL

18009966(FJ)

18009967 (RJ)

*JA2 = Models with 2.5L engine and GVMR over 1784 KG, and models with 3.0L and 4.3L diesel engines

**JA1 = Models with 2.5L engine and GVWR under 1784 KG (GVWR can be found on the certification label located inside the driver's door.)

To ensure this part will be obtained as soon as possible, it should be ordered on a C.I.O. order with no special instruction code, but order on an advise
code (2).
NO SUSPECT VALVES WERE SUPPLIED AS SERVICE PARTS. NO SUSPECT VALVES WERE SUPPLIED AS CAMPAIGN PARTS.

A quantity of known good proportioner valves with the same machine marks as those being replaced, but with date codes higher than the suspect range,
were used to provide campaign parts. Use of valves that look the same as those being replaced has caused confusion at some dealerships.

To eliminate this confusion, and to avoid unnecessary replacement of good valves in the future, the following is recommended:

^

Use any service parts which may be in stock. They are all good valves.

^

Valves received in campaign parts packages, regardless of their machine marks, are okay. Use them on campaign cars as needed.

^

Be sure to install campaign identification labels in each car serviced to avoid unnecessary future replacement of good valves.

^

Do not be concerned with the campaign service valves that you may have, already installed. They are all good valves.

Recall - Brake Proportioner Valve Breakage|Page 3461 > < Recall - Brake Proportioner Valve Breakage|Page 3459