buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Part I - Vehicles Equipped With Air Conditioner or With Heater and Heavy Duty Cooling|Page 1443 > < Part I - Vehicles Equipped With Air Conditioner or With Heater and Heavy Duty Cooling|Page 1441
Page 3
background image

FIGURE 5 - REMOVAL & INSTALLATION OF WIRE TERMINALS

10.

Assemble relay mounting bracket to wheelhouse.

11.

Remove wiring connector from fan high-speed relay. Unlock this connector, remove the four wire terminals and discard connector. Refer to Figure
5.

Part I - Vehicles Equipped With Air Conditioner or With Heater and Heavy Duty Cooling|Page 1443 > < Part I - Vehicles Equipped With Air Conditioner or With Heater and Heavy Duty Cooling|Page 1441