Century V6-204 3.3L VIN N FI (1990)
Clinching Procedure (Step 2)
10. Pry up on outboard shoe with large flat-blade screwdriver or similar tool between outboard shoe flange and hat section of rotor. Keep tool wedged
in place during the following step.
11. Hold moderate force on brake pedal and clinch outboard shoe tabs (13) using procedure shown in image. Outboard shoe should be locked tightly
in position.
12. Remove wheel nuts securing rotor to hub and bearing assembly.
13. Install tire and wheel assembly, aligning previous marks.
14. Lower vehicle and torque wheels.
CAUTION: Before moving vehicle, pump brake pedal several times to be sure it is firm. Do not move vehicle until a firm pedal is
obtained.
15. Check brake operation.
